Browsing by Author "Huo, Mingxin"

Now showing 1 - 5 of 5
  • Thumbnail Image
    ItemOpen Access
    Bactericidal efficiency and photochemical mechanisms of micro/nano bubble–enhanced visible light photocatalytic water disinfection
    (Elsevier, 2021-08-08) Fan, Wei; Cui, Jingyu; Li, Qi; Huo, Yang; Xiao, Dan; Yang, Xia; Yu, Hongbin; Wang, Chunliang; Jarvis, Peter; Lyu, Tao; Huo, Mingxin
    Microbial contamination of water in the form of highly-resistant bacterial spores can cause a long-term risk of waterborne disease. Advanced photocatalysis has become an effective approach to inactivate bacterial spores due to its potential for efficient solar energy conversion alongside reduced formation of disinfection by-products. However, the overall efficiency of the process still requires significant improvements. Here, we proposed and evaluated a novel visible light photocatalytic water disinfection technology by its close coupling with micro/nano bubbles (MNBs). The inactivation rate constant of Bacillus subtilis spores reached 1.28 h−1, which was 5.6 times higher than that observed for treatment without MNBs. The superior performance for the progressive destruction of spores’ cells during the treatment was confirmed by transmission electron microscopy (TEM) and excitation-emission matrix (EEM) spectra determination. Experiments using scavengers of reactive oxygen species (ROSs) revealed that H2O2 and •OH were the primary active species responsible for the inactivation of spores. The effective supply of oxygen from air MNBs helped accelerate the hole oxidation of H2O2 on the photocatalyst (i.e. Ag/TiO2). In addition, the interfacial photoelectric effect from the MNBs was also confirmed to contribute to the spore inactivation. Specifically, MNBs induced strong light scattering, consequently increasing the optical path length in the photocatalysis medium by 54.8% at 700nm and enhancing light adsorption of the photocatalyst. The non-uniformities in dielectricity led to a high-degree of heterogeneity of the electric field, which triggered the formation of a region of enhanced light intensity which ultimately promoted the photocatalytic reaction. Overall, this study provided new insights on the mechanisms of photocatalysis coupled with MNB technology for advanced water treatment.
  • Thumbnail Image
    ItemOpen Access
    An integrated approach using ozone nanobubble and cyclodextrin inclusion complexation to enhance the removal of micropollutants
    (Elsevier, 2021-03-11) Fan, Wei; An, Wengang; Huo, Mingxin; Xiao, Dan; Lyu, Tao; Cui, Jingyu
    Ozone (O3) has been widely used for the elimination of recalcitrant micropollutants in aqueous environments, due to its strong oxidation ability. However, the utilization efficiency of O3 is constrained by its low solubility and short half-life during the treatment process. Herein, an integrated approach, using nanobubble technology and micro-environmental chemistry within cyclodextrin inclusion cavities, was studied in order to enhance the reactivity of ozonisation. Compared with traditional macrobubble aeration with O3 in water, nanobubble aeration achieved 1.7 times higher solubility of O3, and increased the mass transfer coefficient 4.7 times. Moreover, the addition of hydroxypropyl-β-cyclodextrin (HPβCD) further increased the stability of O3 through formation of an inclusion complex in its molecule-specific cavity. At a HPβCD:O3 molar ratio of 10:1, the lifespan of O3 reached 18 times longer than in a HPβCD-free O3 solution. Such approach accelerated the removal efficiency of the model micropollutant, 4-chlorophenol by 6.9 times, compared with conventional macrobubble ozonation. Examination of the HPβCD inclusion complex by UV-visible spectroscopy and Nuclear Magnetic Resonance analyses revealed that both O3 and 4-chlorophenol entered the HPβCD cavity, and Benesi-Hildebrand plots indicated a 1:1 stoichiometry of the host and guest compounds. Additionally, molecular docking simulations were conducted in order to confirm the formation of a ternary complex of HPβCD:4-chlorophenol:O3 and to determine the optimal inclusion mode. With these results, our study highlights the viability of the proposed integrated approach to enhance the ozonation of organic micropollutants
  • Thumbnail Image
    ItemOpen Access
    A modelling approach to explore the optimum bubble size for micro-nanobubble aeration
    (Elsevier, 2022-11-16) Fan, Wei; Li, Yuhang; Lyu, Tao; Yu, Jia'ao; Chen, Zhen; Jarvis, Peter; Huo, Yang; Xiao, Dan; Huo, Mingxin
    Bubble aeration has been widely applied in water/wastewater treatment, however its low gas utilization rate results in high energy consumption. Application of micro-nanobubbles (MNB) has emerged as a process with the potential to significantly increase gas utilisation due to their high relative surface area and high gas-liquid mass transfer efficiency. In this study, we demonstrate through calibrated models that MNB of an optimum bubble size can shrink and burst at or below the water surface enabling (1) all encapsulated gas to thoroughly dissolve in water, and (2) the bursting of nanobubbles to potentially generate free radicals. Through the understanding of MNB dimensional characteristics and bubble behaviour in water, a dynamic model that integrated force balance (i.e. buoyancy force, gravity, drag force, Basset force and virtual mass force), and mass transfer was developed to describe the rising velocity and radius variation of MNB along its upward trajectory. Unlike for conventional millimetre-sized bubbles, intensive gas dissolution of MNBs led to radius reduction for small bubbles, while a large initial radius triggers bubble swelling. The initial water depth was also crucial, where greater depth could drive the potential for bubble shrinkage so that they were more liable to contract. For example, the optimum bubble size of air (42–194 μm) and oxygen (127–470 μm) MNB that could achieve complete gas transfer (100% gas utilisation) for a range of specific water depths (0.5–10 m) were calculated. The modelling results for microbubbles (10–530 μm) were well validated by the experimental data (R2>0.85). However, the validation of the modelling results for nanobubble (<1 μm) aeration requires further study due to a lack of available empirical data. In this study, the proposed model and analysis provided new insights into understanding bubble dynamics in water and offered fundamental guidance for practitioners looking to upgrade bubble aeration system.
  • Thumbnail Image
    ItemEmbargo
    Understanding microplastic presence in different wastewater treatment processes: removal efficiency and source identification
    (Elsevier, 2024-04-26) Ma, Min; Huo, Mingxin; Coulon, Frederic; Ali, Mukhtiar; Tang, Zhiwen; Liu, Xin; Ying, Zhian; Wang, Bin; Song, Xin
    Municipal effluents discharged from wastewater treatment plants (WWTPs) are a considerable source of microplastics in the environment. The dynamic profiles of microplastics in treatment units in WWTPs with different treatment processes remain unclear. This study quantitatively analyzed microplastics in wastewater samples collected from different treatment units in two tertiary treatment plants with distinct processes. The influents contained an average of 15.5 ± 3.5 particles/L and 38.5 ± 2.5 particles/L in the two WWTPs with in the oxidation ditch process and the integrated fixed-film activated sludge process, respectively. Interestingly, microplastic concentrations in the influent were more influenced by the population density in the served area than sewage volume or served population equivalent. Throughout the treatment process, concentrations were reduced to 1.5 ± 0.5 particles/L and 1.0 ± 1.0 particles/L in the final effluents, representing an overall decrease of 90% and 97%, in WWTPs with the oxidation ditch process and integrated fixed-film activated sludge process, respectively. A significant proportion of the microplastics were removed during the primary treatment stage in both WWTPs, with better performance for foam, film, line-shaped and large-sized microplastics. Most microplastics were accumulated in activated sludge, indicating its key role as the primary sink in WWTPs. The multiple correspondence analysis identified laundry washing and daily necessities such as packaging and containers as the major contributors to microplastics in WWTPs. The study proposed recommendations for upgrading WWTPs, modifying designs, and implementing strategies to reduce microplastic sources, aiming to minimize the release of microplastics into the environment. These findings can shed lights on the sources of microplastics in WWTPs, and advance our understanding of the mechanisms for more effective microplastic removals in wastewater treatment technologies in future applications.
  • Thumbnail Image
    ItemOpen Access
    Unveiling the truth of interactions between microplastics and per- and polyfluoroalkyl substances (PFASs) in wastewater treatment plants: microplastics as a carrier of PFASs and beyond
    (American Chemical Society, 2025) Ma, Min; Coulon, Frederic; Tang, Zhiwen; Hu, Zhiyuan; Bi, Ye; Huo, Mingxin; Song, Xin
    Microplastics (MPs) and per- and polyfluoroalkyl substances (PFASs) are ubiquitous contaminants in environments, yet their co-occurrence and interactions remain insufficiently understood. In this study, we confirmed the concurrent presence of MPs and PFASs and their distinct distribution patterns in a wastewater treatment plant (WWTP) through a comprehensive sampling and analysis effort. Significant correlations (p < 0.05) were observed between specific types of MPs and PFASs, suggesting their shared sources. Moreover, MPs were identified as carriers of PFASs, with PFAS concentration ranging between 122 and 166 ng/g, predominantly consisting of perfluorooctanoic acid (PFOA) and perfluorobutanoic acid (PFBA). The laboratory verification experiment revealed that PFASs could be leached from MPs in aqueous environments, in which commercial MPs exhibited higher leaching potential, with the highest combined concentration of perfluorooctanesulfonate (PFOS), PFOA, and PFBA reaching 10.4 ng/mL. PFOS demonstrated a desorption efficiency exceeding 120% in sorption/desorption experiments, confirming its release from the MPs themselves. These results highlighted the dual roles of MPs as both carriers and sources of PFASs. The identified contaminant profiles and correlations between MPs and PFASs across different matrices in WWTP provide valuable insights and form a basis for further research into proactive measures to effectively mitigate their environmental contamination.