Browsing by Author "Somorin, Tosin"
Now showing 1 - 7 of 7
Results Per Page
Sort Options
Item Open Access Conceptual environmental impact assessment of a novel self-sustained sanitation system incorporating a Quantitative Microbial Risk Assessment approach(Elsevier, 2018-05-26) Anastasopoulou, Aikaterini; Kolios, Athanasios; Somorin, Tosin; Sowale, Ayodeji; Jiang, Ying; Fidalgo, Beatriz; Parker, Alison; Williams, Leon; Collins, Matt; McAdam, Ewan; Tyrrel, SeanIn many developing countries, including South Africa, water scarcity has resulted in poor sanitation practices. The majority of the sanitation infrastructures in those regions fail to meet basic hygienic standards. This along with the lack of proper sewage/wastewater infrastructure creates significant environmental and public health concerns. A self-sustained, waterless “Nano Membrane Toilet” (NMT) design was proposed as a result of the “Reinvent the Toilet Challenge” funded by the Bill and Melinda Gates Foundation. A “cradle-to-grave” life cycle assessment (LCA) approach was adopted to study the use of NMT in comparison with conventional pour flush toilet (PFT) and urine-diverting dry toilet (UDDT). All three scenarios were applied in the context of South Africa. In addition, a Quantitative Microbial Risk Assessment (QMRA) was used to reflect the impact of the pathogen risk on human health. LCA study showed that UDDT had the best environmental performance, followed by NMT and PFT systems for all impact categories investigated including human health, resource and ecosystem. This was mainly due to the environmental credits associated with the use of urine and compost as fertilizers. However, with the incorporation of the pathogen impact into the human health impact category, the NMT had a significant better performance than the PFT and UDDT systems, which exhibited an impact category value 4E + 04 and 4E + 03 times higher, respectively. Sensitivity analysis identified that the use of ash as fertilizer, electricity generation and the reduction of NOx emissions were the key areas that influenced significantly the environmental performance of the NMT system.Item Open Access Design and commissioning of a multi-mode prototype for thermochemical conversion of human faeces(Elsevier, 2018-03-23) Jurado Pontes, Nelia; Somorin, Tosin; Kolios, Athanasios J.; Wagland, Stuart; Patchigolla, Kumar; Fidalgo, Beatriz; Parker, Alison; McAdam, Ewan; Williams, Leon; Tyrrel, SeanThis article describes the design and commissioning of a micro-combustor for energy recovery from human faeces, which can operate both in updraft and downdraft modes. Energy recovery from faecal matter via thermochemical conversion has recently been identified as a feasible solution for sanitation problems in low income countries and locations of high income countries where access to sewage infrastructures is difficult or not possible. This technology can be applied to waterless toilets with the additional outcome of generating heat and power that can be used to pre-treat the faeces before their combustion and to ensure that the entire system is self-sustaining. The work presented here is framed within the Nano Membrane Toilet (NMT) project that is being carried out at Cranfield University, as part of the Reinvent the Toilet Challenge of the Bill and Melinda Gates Foundation. For this study, preliminary trials using simulant faeces pellets were first carried out to find out the optimum values for the main operating variables at the scale required by the process, i.e. a fuel flowrate between 0.4 and 1.2 g/min of dry faeces. Parameters such as ignition temperature, residence time, and maximum temperature reached, were determined and used for the final design of the bench-scale combustor prototype. The prototype was successfully commissioned and the first experimental results, using real human faeces, are discussed in the paper.Item Open Access Faecal-wood biomass co-combustion and ash composition analysis(Elsevier, 2017-05-16) Somorin, Tosin; Kolios, Athanasios J.; Parker, Alison; McAdam, Ewan J.; Williams, Leon; Tyrrel, SeanFuel blending is a widely used approach in biomass combustion, particularly for feedstocks with low calorific value and high moisture content. In on-site sanitation technologies, fuel blending is proposed as a pre-treatment requirement to reduce moisture levels and improve the physiochemical properties of raw faeces prior to drying. This study investigates the co-combustion performance of wood dust: raw human faeces blends at varying air-to-fuel ratios in a bench-scale combustor test rig. It concludes with ash composition analyses and discusses their potential application and related problems. The study shows that a 50:50 wood dust (WD): raw human faeces (FC) can reduce moisture levels in raw human faeces by ∼40% prior to drying. The minimum acceptable blend for treating moist faeces without prior drying at a combustion air flow rate of 14–18 L/min is 30:70 WD: FC. For self-sustained ignition and flame propagation, the minimum combustion temperature required for conversion of the fuel to ash is ∼400 °C. The most abundant elements in faecal ash are potassium and calcium, while elements such as nickel, aluminium and iron are in trace quantities. This suggests the potential use of faecal ash as a soil conditioner, but increases the tendency for fly ash formation and sintering problems.Item Open Access Probabilistic performance assessment of complex energy process systems - The case of a self-sustained sanitation system(Elsevier, 2018-02-22) Kolios, Athanasios; Jiang, Ying; Somorin, Tosin; Sowale, Ayodeji; Anastasopoulou, Aikaterini; Anthony, Edward J.; Fidalgo, Beatriz; Parker, Alison; McAdam, Ewan; Williams, Leon; Collins, Matt; Tyrrel, SeanA probabilistic modelling approach was developed and applied to investigate the energy and environmental performance of an innovative sanitation system, the “Nano-membrane Toilet” (NMT). The system treats human excreta via an advanced energy and water recovery island with the aim of addressing current and future sanitation demands. Due to the complex design and inherent characteristics of the system’s input material, there are a number of stochastic variables which may significantly affect the system’s performance. The non-intrusive probabilistic approach adopted in this study combines a finite number of deterministic thermodynamic process simulations with an artificial neural network (ANN) approximation model and Monte Carlo simulations (MCS) to assess the effect of system uncertainties on the predicted performance of the NMT system. The joint probability distributions of the process performance indicators suggest a Stirling Engine (SE) power output in the range of 61.5–73 W with a high confidence interval (CI) of 95%. In addition, there is high probability (with 95% CI) that the NMT system can achieve positive net power output between 15.8 and 35 W. A sensitivity study reveals the system power performance is mostly affected by SE heater temperature. Investigation into the environmental performance of the NMT design, including water recovery and CO2/NOx emissions, suggests significant environmental benefits compared to conventional systems. Results of the probabilistic analysis can better inform future improvements on the system design and operational strategy and this probabilistic assessment framework can also be applied to similar complex engineering systems.Item Open Access Pyrolysis characteristics and kinetics of human faeces, simulant faeces and wood biomass by thermogravimetry–gas chromatography–mass spectrometry methods(Elsevier, 2020-12-09) Somorin, Tosin; Parker, Alison; McAdam, Ewan; Williams, Leon; Tyrrel, Sean F.; Kolios, Athanasios; Jiang, YingHuman faeces (HF) are treated as wastes in many parts of the world, a resource that can be converted to energy and fuels. To enhance the understanding of fuel conversion processes and decomposition characteristics, this study investigated the pyrolysis behaviour and evolved gas profiles of HF using thermogravimetry with gas chromatography–mass spectrometry methods. Kinetic parameters were deduced using model-free kinetic models. Results are compared with simulant faeces (SF), wood biomass (WB) and HF–WB blends. The pyrolysis of HF involved two decomposition peaks — a fronting peak with weight loss of ∼. The apparent activation energy for HF varied from 122–382 kJ/mol at conversion rates of 10%–90% using Kissinger–Akahira–Sunose model. Some of the key pyrolysis products for HF at 370 °C were 4-methoxy-phenol, n-hexadecanoic acid, phenol, 4-methyl- and indole isomer (pyrrolo[1,2-a]pyridine). At 530 °C, evolved gases were largely fragmented with high proportions of alkanes and alkenes including 3-dodecane, 2-undecane, 6-tridecene, 2-propenylidene-cyclobutene. These products differed to WB that are largely hydroxyphenyls and methoxyphenols with guaiacyl or syringil structures. Blending with WB improved pyrolysis of HF, irrespective of the proportions of blendItem Open Access State-level assessment of the waste-to-energy potential (via incineration) of municipal solid wastes in Nigeria(Elsevier, 2017-06-27) Somorin, Tosin; Adesola, Sola; Kolawole, AishaThe quest for reliable and adequate power supply in Nigeria has brought about a surge of interest in renewable energy generation, particularly from wind, solar, hydro and biomass resources including municipal solid waste. Waste-derived energy raises unique interest because of the magnitude of benefits to environmental protection and socio-economic advancement. The successful operation of Waste-to Energy (WtE) facilities in Nigeria requires continuous supply of solid waste and enabling environment amongst other factors. This study conducted a state-level assessment of the WtE potential of municipal solid waste (MSW) in Nigeria. Our findings show that the electricity generation potential for the different states in Nigeria varied from 31 to 205 MW, depending on state’s waste generation capacity. The country’s annual electricity generation potential from MSW was estimated to be 26,744 GWh/year, with 89% of the states having sufficient generation capacity at minimum regulatory electricity generation requirement of 50 MW. But, based on current realities such as poor collection efficiencies, Nigeria’s exploitable WtE capacity from MSW was below 3800 GWh/year, with all the states having less than 50 MW capacity. On-site power generation such as dedicated power station for industrial estates and corporate users can be a feasible form of distributing energy generated from WtE facilities. The outcomes of this study are important in informing the siting of WtE facilities in Nigeria and for enabling policy framework.Item Open Access Thermodynamic analysis of a gamma type Stirling engine in an energy recovery system(Elsevier, 2018-04-01) Sowale, Ayodeji; Kolios, Athanasios J.; Fidalgo, Beatriz; Somorin, Tosin; Parker, Alison; Williams, Leon; Collins, Matt; McAdam, Ewan; Tyrrel, SeanThe demand for better hygiene has increased the need for developing more effective sanitation systems and facilities for the safe disposal of human urine and faeces. Non-Sewered Sanitary systems are considered to be one of the promising alternative solutions to the existing flush toilet system. An example of these systems is the Nano Membrane Toilet (NMT) system being developed at Cranfield University, which targets the safe disposal of human waste while generating power and recovering water. The NMT will generate energy from the conversion of human waste with the use of a micro-combustor; the heat produced will power a Stirling engine connected to a linear alternator to generate electricity. This study presents a numerical investigation of the thermodynamic analysis and operational characteristics of a quasi steady state model of the gamma type Stirling engine integrated into a combustor in the back end of the NMT system. The effects of the working gas, at different temperatures, on the Stirling engine performance are also presented. The results show that with the heater temperature of 390 °C from the heat supply via conduction at 820 W from the flue gas, the Stirling engine generates a daily power output of 27 Wh/h at a frequency of 23.85 Hz.