Browsing by Author "Wang, Le"

Now showing 1 - 3 of 3
  • Thumbnail Image
    ItemOpen Access
    Aerodynamic performance of a flyable flapping wing rotor with passive pitching angle variation
    (IEEE, 2021-09-22) Chen, Si; Wang, Le; He, Yuanyuan; Tong, Mingbo; Pan, Yingjun; Ji, Bing; Guo, Shijun
    The present work was based on an experimental study on the aerodynamic performance of a flapping wing rotor (FWR) and enhancement by passive pitching angle variation (PPAV) associated with powered flapping motion. The PPAV (in this study 10o~50o) was realized by a specially designed sleeve-pin unit as part of a U-shape flapping mechanism. Through experiment and analysis, it was found that the average lift produced by an FWR of PPAV was >100% higher than the baseline model, the same FWR of a constant pitching angle 30o under the same input power. It was also noted that the lift-voltage relationship for the FWR of PPAV was almost linear and the aerodynamic efficiency was also over 100% higher than the baseline FWR when the input voltage was under 6V. The aerodynamic lift or efficiency of the FWR of PPAV can be also increased significantly by reducing the weight of the wings. An FWR model was fabricated and achieved vertical take-off and free flight powered by 9V input voltage. The mechanism of PPAV function provides a feasible solution for aerodynamic improvement of a bio-inspired FWR and potential application to micro-air-vehicles (MAVs).
  • Thumbnail Image
    ItemOpen Access
    A bio-inspired flapping wing rotor of variant frequency driven by ultrasonic motor
    (MDPI, 2020-01-06) Chen, Si; Wang, Le; Guo, Shijun; Zhao, Chunsheng; Tong, Mingbo
    By combining the flapping and rotary motion, a bio-inspired flapping wing rotor (FWR) is a unique kinematics of motion. It can produce a significantly greater aerodynamic lift and efficiency than mimicking the insect wings in a vertical take-off and landing (VTOL). To produce the same lift, the FWR’s flapping frequency, twist angle, and self-propelling rotational speed is significantly smaller than the insect-like flapping wings and rotors. Like its opponents, however, the effect of variant flapping frequency (VFF) of a FWR, during a flapping cycle on its aerodynamic characteristics and efficiency, remains to be evaluated. A FWR model is built to carry out experimental work. To be able to vary the flapping frequency rapidly during a stroke, an ultrasonic motor (USM) is used to drive the FWR. Experiment and numerical simulation using computational fluid dynamics (CFD) are performed in a VFF range versus the usual constant flapping frequency (CFF) cases. The measured lifting forces agree very well with the CFD results. Flapping frequency in an up-stroke is smaller than a down-stroke, and the negative lift and inertia forces can be reduced significantly. The average lift of the FWR where the motion in VFF is greater than the CFF, in the same input motor power or equivalent flapping frequency. In other words, the required power for a VFF case to produce a specified lift is less than a CFF case. For this FWR model, the optimal installation angle of the wings for high lift and efficiency is found to be 30° and the Strouhal number of the VFF cases is between 0.3–0.36. View Full-Text
  • Thumbnail Image
    ItemOpen Access
    Effect of asymmetric feathering angle on the aerodynamic performance of a flyable bionic flapping-wing rotor
    (MDPI, 2023-03-18) Chen, Si; Wang, Le; Guo, Shijun; Tong, Mingbo; He, Yuanyuan
    The current study involves an experimental as well as numerical study on the aerodynamic behavior of a flapping-wing rotor (FWR) with different feathering amplitudes (−20°–50°, −50°–20°, and −35°–35°). In order to fulfil the experimental test, an FWR which weighs 18.7 g is designed in this manuscript. According to the experimental and numerical results, it was observed that, compared with the cases under a zero average stroke angle, the cases under a positive average stroke angle or negative average stroke angle share a higher rotary speed given the same input voltage. Despite the fact that the negative average stroke angle would facilitate the generation of a higher rotary speed, the negative average stroke angle cases tend to generate the smallest lift-to-power ratio. On the other hand, the cases with a positive average stroke angle tend to share the largest lift-to-power ratio (about 1.25 times those of zero average stroke angle cases and about 1.6 times those of negative average stroke angle cases). The above study indicates that the application of a positive average stroke angle can provide an effective solution to further increase the aerodynamic performance of a bio-inspired FWR.