Manufacturing and Materials
Permanent URI for this collection
Browse
Browsing Manufacturing and Materials by Issue Date
Now showing 1 - 20 of 154
Results Per Page
Sort Options
Item Open Access Modelling of the workpiece geometry effects on Ti-6Al-4V linear friction welds - open access data(Cranfield University, 2016-05-06 14:33) McAndrew, Anthony; Colegrove, Paul; Addison, Adrian; Flipo, Bertrand; Lee, Lucie; Russell, MichaelExperimental data set from the article "Modelling of the workpiece geometry effects on Ti-6Al-4V linear friction welds"Please see the introduction tab in the excel file for further details.Item Open Access Sustainable manufacturing for the future – second white paper(Cranfield University, 2016-06-06 16:15) Jolly, MarkThis second white paper presents the results of 3 x 3 Month studies on the Pathways for Sustainable Manufacturing tin the future in the Food and Drinks Industry in Great BriatinItem Open Access Sustainable manufacturing for the future - a white paper(Cranfield University, 2016-06-06 16:15) Jolly, MarkFirst white paper on the future of Manufacturing in the Food and Drinks industry in Great Britain based on the outcomes of an Industry-Academia Workshop.Item Open Access Data supporting Technology readiness level assessment of composites recycling technologies article(Cranfield University, 2016-06-17 11:27) Rybicka, Justyna; Tiwari, Ashutosh; Leeke, GaryData supporting Technology readiness level assessment of composites recycling technologies articleItem Open Access Tensile data(Cranfield University, 2016-07-01 13:11) Rodrigues Pardal; Ganguly, Supriyo; Williams, Stewart; Vaja, JayTensile data from the CMT paper.Item Open Access Welding and SEM - EDS data(Cranfield University, 2016-07-08 10:26) Rodrigues Pardal, Goncalo; Ganguly, Supriyo; Williams, Stewart; Vaja, JayWelding conditions reported on the paper.SEM-EDS data used in the paperItem Open Access Multi-objective optimisation of the cure of thick components(Cranfield University, 2016-11-18 08:21) Struzziero, Giacomo; Skordos, AlexThe file-set contains the following files:-Flatpanel_24mm.dat: A Marc input file used as template for the optimisation methodology-Usub.f: Contains the subroutines implemented to modify the input file at each optimisation iteration-Exhaustive_search.xlsx: Contains the data of the comparison between the GA and exhaustive search final Pareto fronts. Columns contain temperature of first and second dwell, duration of first dwell, ramp rate, process time and overshoot temperature for the exhaustive case whilst in column H and I the process time and overshoot temperature of the GA Pareto are reported.-Flat_panel_results.xlsx: The spreadsheet contains: optimisation of flat panel 24 and 60 mm case, optimisation of flat panel 60 mm with 30 and 100 W/m^2 K convection coefficient and optimisation of flat panel 24 mm with 30 and 100 W/m^2 K convection coefficient. In each sheet columns contain the generation number, the optimisation parameters, process time and temperature overshoot.-L_shape_results.xlsx: The spreadsheet contains optimisation of the L-shape for the 24 and 60 mm case. In each sheet columns contain the generation number, the optimisation parameters, process time and temperature overshoot. -T_joint_results.xlsx: The spreadsheet contains optimisation of the T-joint for the 24 and 60 mm case. In each sheet columns contain the generation number, the optimisation parameters, process time and temperature overshoot.-L_shape_24mm_corner_point.xlsx: Containsthe detailed analysis of a corner point optimisation solution for the L-shape 24 mm. Columns contain time, temperature, degree of cure and reaction rate values at different increments for different nodes through thickness.-L_shape_24mm_standard_point.xlsx: Containsthe detailed analysis of the standard point solution for the L-shape 24 mm. Columns contain time, temperature, degree of cure and reaction rate values at different increments for different nodes through thickness.-L_shape_24mm_horizontal_point.xlsx: Containsthe detailed analysis of a corner point optimisation solution for the L-shape 24 mm. Columns contain time, temperature, degree of cure and reaction rate values at different increments for different nodes through thickness.Item Open Access 3D modelling of Ti-6Al-4V linear friction welds.(Cranfield University, 2016-11-28 08:49) McAndrew, Anthony; Colegrove, Paul; Buhr, ClementExperimental data set from the article "3D modelling of Ti-6Al-4V linear friction welds"Please see the introduction tab in the excel file for further details.Item Open Access Comparison of alternatives to amplitude thresholding for onset detection of acoustic emission signals(Cranfield University, 2017-03-07 09:31) Zhao, YifanData used in the publication "New methods for onset detection of acoustic emission signals".- crack_data 111 pairs: data used for Section 4.- AE data: data used for Section 2.Also used in the paper "Comparison of alternatives to amplitude thresholding for onset detection of acoustic emission signals".Item Open Access Linking Human and Machine - Towards Consumer - Driven Automated Manufacturing(Cranfield University, 2017-03-10 13:55) Isaev, Samet; Jreissat, Mohannad; Wagner, Christian; Makatsoris, HarrisWe established a link between linguistic descriptors describing food preferences and product manufacturing processes. Model-based methodology was employed to translate consumer preferences into product and process specifications. The aim of the research is the large scale personalization of formulated food product manufacture where consumers are also the con-creators of the food products they wish to buy. Fuzzyset modelling was used to capture the preferences and perceptions by different group of people. Then, models were employed to established the links between such product attributes and the actual formulation parameters to make the product.Item Open Access Consumer Driven New Product Development in Future Re-Distributed Models of Sustainable Production and Consumption(Cranfield University, 2017-03-10 16:19) Isaev, Samet; Makatsoris, Harris; Moreno, Mariale; Jreissat, MohannadThe customer as co-creator of products is a grand challenge the entire consumer products manufacturing industry is facing. The design, manufacture and delivery of mass personalized customer products are critical important for economically and sustainable production. Wedemonstrated a model-based methodology and manufacturing process development for large scale beverage product customization.An orange beverage has been selected as case study to show that by linking a game-like consumer facing we b application and a novel computer driven flow manufacturing system. First we obtained the target sensory attributes from consumer groups, those data rapidly translated into a new formulation recipe and its manufacturing process of a beverage that meets those needs and prototyped for that consumer group to evaluate. This platform is web application under development by the Harris Makatsoris research group. Workshops were organised to collect data by theHarris Makatsoris research group at Cranfield University.Item Open Access Workshop Series Towards Preference Marketplace Development(Cranfield University, 2017-03-10 16:25) Isaev, Samet; Makatsoris, Harris; Green, Stephen; Ceschin, FabrizioA series of workshops have been conducted to develop a digital crowdsourcing tool. Preference marketplace is inspired from traditional stock market and prediction markets. the aim of the proposed method is to engage consumers using game mechanics in order to aggregate large and diverse group of people`s opinion toidentify the most promisingnew product ideas and concepts. First we conducted paper based workshops to collect feedback from users. Participants engagement werevery good and their feedback was very positive. After that we developed digital platform and conducted another workshops in the digital environment in order to test performance and the limitations of the online software. A real food product case study was used for the workshop. This platform is web application under development by the Harris Makatsoris research group. Workshops were organised to collect data by theHarris Makatsoris research group at Brunel and Cranfield Universities.Item Open Access Testing and Evaluation of Preference Marketplace Web Application(Cranfield University, 2017-03-15 09:51) Isaev, Samet; Moreno, Mariale; Makatsoris, HarrisPreference marketplace is digital crowdsourcing tool which employs game mechanics to engage consumers in order to understand their requirements and prioritise the most required product attributes and concepts. A number of case study including food and beverage products has been employed to test the performance of the platform. This platform is web application under development by the Harris Makatsoris research group. Workshops were organised by theHarris Makatsoris research group to collect data at Cranfield University.Item Open Access Data underpinning “Investigation of post-weld rolling methods to reduce residual stress and distortion”(Cranfield University, 2017-04-27 08:52) Colegrove, Paul; Cozzolino, DanielData set containing the results from models that predict residual stress and distortion after rolling.Item Open Access Adhesively bonded composite testing(Cranfield University, 2017-06-01 10:43) Yazdani Nezhad, Hamed; Ayre, DavidDataset used in Figure 2 in "Tensile Response of Adhesively Bonded Composite-to-composite Single-lap Joints in the Presence of Bond Deficiency" (doi:10.1016/j.procir.2016.09.021). Also used in "A novel process-linked assembly failure model for adhesively bonded composite structures" (doi:10.1016/j.cirp.2017.04.103).Item Open Access Parameters controlling weld bead profile in conduction laser welding(Cranfield University, 2017-07-03 09:24) Ayoola, Wasiu; Suder, Wojciech; Williams, StewartThis file contains all data set presented in the above paper.Item Open Access Data Underpinning "Weld-Bonded Stainless Steel to Carbon Fibre-Reinforced Plastic Joints"(Cranfield University, 2017-09-07 15:26) Colegrove, Paul; Joesbury, Adam; Ayre, David; Van Rymenant, Patrick; Ganguly, Supriyo; Williams, StewartFigures for article entitled "Weld-Bonded Stainless Steel to Carbon Fibre-Reinforced Plastic Joints"Item Open Access Data for "A Confidence Map based Damage Assessment Approach using Pulsed Thermographic Inspection"(Cranfield University, 2017-10-09 11:41) Zhao, YifanThe data for the paper accepted by NDT E International.The zip contains txt files and also .raw and .mat which require Matlab.Item Open Access Supporting data for "A framework to estimate the cost of No-Fault Found events"(Cranfield University, 2017-10-10 11:57) ahmet Erkoyuncu, John; Roy, Rajkumar; Khan, Samir; Mohammed Fazal Hussain, SyedThe files cover: the questionnaire used, the input data requirements, and a presentation containing further data and supporting information that went into the modelling in the paper "A framework to estimate the cost of No-Fault Found events".Item Open Access Data for the paper "UV Treatment of Flexible Copper Nanowire Mesh Films for Transparent Conductor Applications"(Cranfield University, 2017-11-01 10:07) Lonne, Quentin; Endrino Armenteros, Jose; Huang, ZhaorongData used in the accompanying paper.