Browsing by Author "Abedi, Hamidreza"

Now showing 1 - 3 of 3
  • Thumbnail Image
    ItemOpen Access
    Preliminary analysis of compression system integrated heat management concepts using LH2-based parametric gas turbine model
    (MDPI, 2022-04-14) Abedi, Hamidreza; Xisto, Carlos M.; Jonsson, Isak; Grönstedt, Tomas; Rolt, Andrew Martin
    The investigation of the various heat management concepts using LH2 requires the development of a modeling environment coupling the cryogenic hydrogen fuel system with turbofan performance. This paper presents a numerical framework to model hydrogen-fueled gas turbine engines with a dedicated heat-management system, complemented by an introductory analysis of the impact of using LH2 to precool and intercool in the compression system. The propulsion installations comprise Brayton cycle-based turbofans and first assessments are made on how to use the hydrogen as a heat sink integrated into the compression system. Conceptual tubular compact heat exchanger designs are explored to either precool or intercool the compression system and preheat the fuel to improve the installed performance of the propulsion cycles. The precooler and the intercooler show up to 0.3% improved specific fuel consumption for heat exchanger effectiveness in the range 0.5–0.6, but higher effectiveness designs incur disproportionately higher pressure losses that cancel-out the benefits.
  • Thumbnail Image
    ItemOpen Access
    Synergistic technology combinations for future commercial aircraft using liquid hydrogen
    (American Society of Mechanical Engineers, 2021-01-11) Rompokos, Pavlos; Rolt, Andrew Martin; Nalianda, Devaiah; Isikveren, Askin T.; Senné, Capucine; Grönstedt, Tomas; Abedi, Hamidreza
    Liquid hydrogen (LH2) has long been seen as a technically feasible fuel for a fully sustainable greener aviation future. The low density of the cryogenic fuel would dictate the redesign of commercial aircraft to accommodate the large tanks, which are unlikely to be integrated within the whole internal volume of the wing. In the ENABLEH2 project, the morphological aspects of a LH2 aircraft design are discussed and a methodology for rapid concept comparative assessment is proposed. An exercise is then carried on to down-select short-to-medium range (SMR) and long-range (LR) concepts, able to carry 200 passengers for 3000 nmi and 414 passengers for 7500 nmi respectively. The down-selection process was split into two phases with the first considering 31 potential airframe architectures and 21 propulsion-system arrangements. The second phase made the final down-selections from a short-list of nine integrated design concepts that were ranked according to 34 criteria, relating to operating cost, revenue, noise and safety. Upon completion of the process, a tube and wing design with the tanks integrated into extended wing roots, and a blended-wing-body design were selected as the best candidates for the SMR and LR applications respectively. Both concepts feature distributed propulsion to maximise synergies from integrating the airframe and propulsion systems.
  • Thumbnail Image
    ItemOpen Access
    Synergistic technology combinations for future commercial aircraft using liquid hydrogen
    (American Society of Mechanical Engineers, 2021-01-13) Rompokos, Pavlos; Rolt, Andrew Martin; Nalianda, Devaiah; Isikveren, Askin T.; Senné, Capucine; Gronstedt, Tomas; Abedi, Hamidreza
    Liquid hydrogen (LH2) has long been seen as a technically feasible fuel for a fully sustainable greener aviation future. The low density of the cryogenic fuel would dictate the redesign of commercial aircraft to accommodate the large tanks, which are unlikely to be integrated within the whole internal volume of the wing. In the ENABLEH2 project, the morphological aspects of a LH2 aircraft design are discussed and a methodology for rapid concept comparative assessment is proposed. An exercise is then carried on to down-select short-to-medium range (SMR) and long-range (LR) concepts, able to carry 200 passengers for 3000 nmi and 414 passengers for 7500?nmi respectively. The down-selection process was split into two phases with the first considering 31 potential airframe architectures and 21 propulsion-system arrangements. The second phase made the final down-selections from a short-list of nine integrated design concepts that were ranked according to 34 criteria, relating to operating cost, revenue, noise and safety. Upon completion of the process, a tube and wing design with the tanks integrated into extended wing roots, and a blended-wing-body design were selected as the best candidates for the SMR and LR applications respectively. Both concepts feature distributed propulsion to maximise synergies from integrating the airframe and propulsion systems.