Browsing by Author "Li, Boyuan"

Now showing 1 - 4 of 4
  • Thumbnail Image
    ItemOpen Access
    Integrated Path-tracking and Control Allocation Controller for Autonomous Electric Vehicle under Limit Handling Condition
    (IEEE, 2021-01-08) Li, Boyuan; Ahmadi, Javad; Lin, Chenhui; Siampis, Efstathios; Longo, Stefano; Velenis, Efstathios
    In current literature, a number of studies have separately considered path-tracking (PT) control and control allocation (CA) method, but few of studies have integrated them together. This study proposes an integrated PT and CA method for autonomous electric vehicle with independent steering and driving actuators in the limit handling scenario. The high-level feedback PT controller can determine the desired total tire forces and yaw moment, and is designed to guarantee yaw angle error and lateral deviation converge to zero simultaneously. The low-level CA method is formulated as a compact quadratic programming (QP) optimization formulation to optimally allocate individual control actuator. This CA method is designed for a prototype experiment electric vehicle with particularly steering and driving actuator arrangement. The proposed integrated PT controller is validate through numerical simulation based on a high-fidelity CarMaker model on highspeed limit handling scenario.
  • Thumbnail Image
    ItemOpen Access
    An integrated path-tracking and control allocation method for autonomous racing electric vehicles
    (Taylor & Francis, 2023-08-08) Li, Boyuan; Lin, Chenhui; Ahmadi, Javad; Siampis, Efstathios; Longo, Stefano; Velenis, Efstathios
    In recent years, path-tracking controllers for autonomous passenger vehicles and Control Allocation (CA) methods for handling and stability control have both received extensive discussion in the literature. However, the integration of the path-tracking control with CA methods for autonomous racing vehicles has not attracted much attention. In this study, we design an integrated path-tracking and CA method for a prototype autonomous racing electric vehicle with a particular focus on the maximising the turning speed in tight cornering. The proposed control strategy has a hierarchical structure to improve the computational efficiency: the high-level path-tracking Model Predictive Control (MPC) based on a rigid body model is designed to determine the virtual control forces according to the desired path and desired maximum velocity profile, while the low-level CA method uses a Quadratically Constrained Quadratic Programming (QCQP) formulation to distribute the individual control actuator according to the desired virtual control values. The proposed controller is validated in a high-fidelity simulation vehicle model with the computational time of the optimisation controller presented to demonstrate the real-time control performance.
  • Thumbnail Image
    ItemOpen Access
    Integrated trajectory planning and control for obstacle avoidance manoeuvre using nonlinear vehicle model-predictive algorithm
    (IET, 2019-10-22) Li, Boyuan; Du, Haiping; Li, Weihua; Zhang, Bangji
    In the current literature, model-predictive (MP) algorithm is widely applied in autonomous vehicle trajectory planning and control but most of the current studies only apply the linear tyre model, which cannot accurately present the tyre non-linear characteristic. Furthermore, most of these studies separately consider the trajectory planning and trajectory control of the autonomous vehicle and few of them have integrated the trajectory planning and trajectory control together. To fill in above research gaps, this study proposes the integrated trajectory planning and trajectory control method using a non-linear vehicle MP algorithm. To fully utilise the advantages of four-wheel-independent-steering and four-wheel-independent-driving vehicle, the MP algorithm is proposed based on four-wheel dynamics model and non-linear Dugoff tyre model. This study also proposes the mathematical modelling of the static obstacle and dynamic obstacle for the obstacle avoidance manoeuvre of the autonomous vehicle. Finally, simulation results have been presented to show the effectiveness of the proposed control method.
  • Thumbnail Image
    ItemOpen Access
    Predictive path-tracking control of an autonomous electric vehicle with various multi-actuation topologies
    (MDPI, 2024-02-28) Lin, Chenhui; Li, Boyuan; Siampis, Efstathios; Longo, Stefano; Velenis, Efstathios
    This paper presents the development of path-tracking control strategies for an over-actuated autonomous electric vehicle. The vehicle platform is equipped with four-wheel steering (4WS) as well as torque vectoring (TV) capabilities, which enable the control of vehicle dynamics to be enhanced. A nonlinear model predictive controller is proposed taking into account the nonlinearities in vehicle dynamics at the limits of handling as well as the crucial actuator constraints. Controllers with different actuation formulations are presented and compared to study the path-tracking performance of the vehicle with different levels of actuation. The controllers are implemented in a high-fidelity simulation environment considering scenarios of vehicle handling limits. According to the simulation results, the vehicle achieves the best overall path-tracking performance with combined 4WS and TV, which illustrates that the over-actuation topology can enhance the path-tracking performance during conditions under the limits of handling. In addition, the performance of the over-actuation controller is further assessed with different sampling times as well as prediction horizons in order to investigate the effect of such parameters on the control performance, and its capability for real-time execution. In the end, the over-actuation control strategy is implemented on a target machine for real-time validation. The control formulation proposed in this paper is proven to be compatible with different levels of actuation, and it is also demonstrated in this work that it is possible to include the particular over-actuation formulation and specific nonlinear vehicle dynamics in real-time operation, with the sampling time and prediction time providing a compromise between path-tracking performance and computational time.