Browsing by Author "Vitlaris, Dimitrios"

Now showing 1 - 7 of 7
  • No Thumbnail Available
    ItemOpen Access
    Data for Paper "Numerical Investigation of Orifice Nearfield Flow Development in Oleo-Pneumatic Shock Absorbers"
    (Cranfield University, 2022-02-18 09:57) Sheikh Al Shabab, Ahmed; Skote, Martin; Tsoutsanis, Panagiotis; Antoniadis, Antonios; Vitlaris, Dimitrios; Grenko, Bojan
    Data for the journal paper titled: Numerical Investigation of Orifice Nearfield Flow Development in Oleo-Pneumatic Shock Absorbers
  • No Thumbnail Available
    ItemOpen Access
    Data for: Numerical Investigation of Oleo-Pneumatic Shock Absorber: A Multi-Fidelity Approach
    (Cranfield University, 2023-08-25) Sheikh Al Shabab, Ahmed; Grenko, Bojan; Vitlaris, Dimitrios; Tsoutsanis, Panagiotis; Antoniadis, Antonios; Skote, Martin
    Raw data of simulations used in the ECCOMAS 2022 paper titled: Numerical Investigation of Oleo-Pneumatic Shock Absorber: A Multi-Fidelity Approach
  • Thumbnail Image
    ItemOpen Access
    Numerical investigation of oleo-pneumatic shock absorber: a multi-fidelity approach
    (ECCOMAS, 2022-11-24) Sheikh Al Shabab, Ahmed; Grenko, Bojan; Vitlaris, Dimitrios; Tsoutsanis, Panagiotis; Antoniadis, Antonis; Skote, Martin
    A representative shock absorber geometry is developed based on the general guidelines available in the literature, and it is validated against experimental measurements from a drop test. Simulations are conducted using a multi-fidelity approach ranging from unsteady scale resolving three-dimensional simulations to dynamic system models. High fidelity simulations provide a detailed insight into the flow physics inside the shock absorber, as well as help calibrate and validate lower fidelity methods, under conditions for which no experimental measurements are available to achieve that purpose. On the other hand, lower fidelity methods are used to efficiently scan the design space and test the dependency of the shock absorber performance on the various design parameters, in addition to identifying parameter combinations that would be of interest to investigate using a high-fidelity approach.
  • Thumbnail Image
    ItemOpen Access
    Numerical investigation of oleo-pneumatic shock absorber: setup and validation
    (ECCOMAS, 2021-03-11) Sheikh Al-Shabab, Ahmed A.; Vitlaris, Dimitrios; Lin, Zhonglu; Grenko, Bojan; Tsoutsanis, Panagiotis; Antoniadis, Antonis; Skote, Martin
    The simulation of an oleo-pneumatic shock absorber is discussed focusing on the solver validation and high fidelity case setup. The multi-physics nature of the problem is tackled by conducting a range of validation cases in the base areas expected to be of relevance. A dynamic system model of the shock absorber is used to generate physically consistent boundary conditions. In addition, steady RANS simulations provide a preliminary insight into the internal flow development and to assist in the design of higher resolution grids.
  • Thumbnail Image
    ItemOpen Access
    Numerical investigation of orifice nearfield flow development in oleo-pneumatic shock absorbers
    (MDPI, 2022-01-25) Sheikh Al-Shabab, Ahmed A.; Grenko, Bojan; Vitlaris, Dimitrios; Tsoutsanis, Panagiotis; Antoniadis, Antonis F.; Skote, Martin
    The flow field development through a simplified shock absorber orifice geometry is investigated using a single phase Large Eddy Simulation. Hydraulic oil is used as the working fluid with a constant inlet velocity and an open top boundary to allow the study to focus on the free shear layer and the flow development in the vicinity of the main orifice. The flow field is validated using standard mixing layer dynamics. The impact of the orifice shape is discussed with regards to the initial free shear layer growth, boundary layer development and the potential appearance of cavitation bubbles. Observations are made regarding the presence of flow field disturbances upstream of and through the orifice, thereby, leading to a notable turbulence intensity level in those regions.
  • Thumbnail Image
    ItemOpen Access
    On hysteresis in a variable pitch fan transitioning to reverse thrust mode and back
    (American Society of Mechanical Engineers, 2024-06-24) Vitlaris, Dimitrios; Rajendran, David John; Tunstall, Richard; Whurr, John; Pachidis, Vassilios
    A novel hysteresis phenomenon during the transition to and back from the reverse thrust mode in a Variable Pitch Fan (VPF) is identified and characterised in this work. This is done by using a three-dimensional (3D) fully transient Unsteady Reynolds-averaged Navier-Stokes (URANS) with the transitioning fan blade aerofoils simulated by an adaptation of the mesh displacement method. A “real-time” simulation of the complete VPF hysteresis loop is achieved by specifying a blade wall motion through an Eulerian rotation matrix in differential, gradual steps, that is combined with a mesh probe-and-update routine for improved numerical accuracy and stability. The VPF is modelled to be transitioning in a modern 40000 lbf geared high bypass ratio turbofan engine architecture at “Approach Idle” engine power setting in a typical twin-engine airframe with the flaps, slats, and spoilers set for an aircraft touchdown airspeed of 140 knots. The transition to reverse thrust mode involves flow starvation into the engine, formation of recirculation zones in the bypass duct and the establishment of the reverse stream, all of which occurs in the opposing presence of the free stream flow at aircraft touchdown velocity. The transition back to forward flow mode involves the gradual re-establishment of the free stream which is opposed by the presence of the reverse stream within the engine. It is quantified that in the transition to reverse thrust, the blockage develops with a larger time delay than the disappearance of the blockage during the transition back due to the interplay of the temporal dynamics of fan blade motion and flow field response. The details of the changes in the flow field behaviour, the effect of engine power setting and aircraft touch down velocity on the hysteresis behaviour are explained in detail in the paper. Additional manifestations of the hysteresis phenomena at reverse thrust involving engine spool-up and down, and aircraft acceleration-deceleration manoeuvres are also explored. The hysteresis phenomena described in this work are critical in properly developing control schedules to adapt for potential bi-stable flow field development during the landing run. The study addresses another part of the puzzle in exploring the feasibility of reverse thrust capable VPF engines for future sustainable aircraft to reach aviation climate neutrality.
  • Thumbnail Image
    ItemOpen Access
    On the flow physics during the transition of a variable pitch fan from nominal operation to reverse thrust mode
    (American Society of Mechanical Engineers, 2023-12-01) Vitlaris, Dimitrios; Rajendran, David John; Tunstall, Richard; Whurr, John; Pachidis, Vassilios
    The flow field during the transition of variable pitch fans (VPFs) from nominal operation to reverse thrust mode at typical “Approach Idle” engine power setting and aircraft touchdown speed of 140 knots is described in this work. An integrated airframe-engine-VPF research model that features a future 40,000 lbf geared high bypass ratio engine installed on a twin-engine airframe in landing configuration is used to explore the flow field in a fully transient unsteady Reynolds-averaged Navier–Stokes (URANS) simulation with imposed wall motion. A novel methodology that implements an adaptation of a mesh displacement equation to mimic the fan blade airfoil rotation is developed. The implementation of this method with gradual, small-step deformation along with an automated mesh update routine enables a high quality, near “real-time” simulation of the complete transition. The flow field during transition is characterized by the evolution from full typical forward flow through the engine to the development of massive recirculation regions at the feather pitch setting and finally to development of a reverse flow from the bypass nozzle to the fan passages. In the paper, the transient development of the various flow features through different stations of the engine flow path apropos the fan blade airfoil rotation to reverse thrust mode are discussed in detail. Also, the temporal development of the mass flow ingested through the engine, airframe decelerating force, and distorted flow at the core engine inlet are described. A hitherto unresolved fan power peaking during the middle of the transition and higher power requirement at reverse thrust mode is captured. The effect of fan rotational speed in terms of engine power setting and the aircraft touchdown velocity on the transition flow physics is explored. A comparison of this fully transient approach with discrete steady-state runs for different stagger angle settings is presented. The flow physics during transition to reverse thrust mode as described in this study is critical in understanding the feasibility of using VPF for reverse thrust in future aircraft. The new capability to study the transition in a fully transient simulation can be used as a design development aid to define design and control characteristics of the reverse thrust VPF.