School of Water, Energy and Environment (SWEE)

Permanent URI for this community

https://dspace.lib.cranfield.ac.uk/handle/1826/8737

Browse

Browsing School of Water, Energy and Environment (SWEE) by Publisher "American Society of Agricultural and Biological Engineers"

Now showing 1 - 2 of 2
  • Thumbnail Image
    ItemOpen Access
    An investigation into the fertilizer particle dynamics off-the-disc
    (American Society of Agricultural and Biological Engineers, 2015) Antille, Diogenes Luis; Gallar, Luis; Miller, P. C. H.; Godwin, R. J.
    The particle size range specifications for two biosolids-derived organomineral fertilizers (OMF) known as OMF10 (10:4:4) and OMF15 (15:4:4) were established. Such specifications will enable field application of OMF with spinning disc systems using conventional tramlines spacing. A theoretical model was developed, which predicts the trajectory of individual fertilizer particles off-the-disc. The drag coefficient (Cd) was estimated for small time steps (10-6 s) in the trajectory of the particle as a function of the Reynolds number. For the range of initial velocities (20 to 40 m s-1), release angles (0° to 10°) and particle densities (1000 to 2000 kg m-3) investigated, the analysis showed that OMF10 and OMF15 need to have particle diameters between 1.10 and 5.80 mm, and between 1.05 and 5.50 mm, respectively, to provide similar spreading performance to urea with particle size range of 1.00 to 5.25 mm in diameter. OMF10 and OMF15 should have 80% (by weight) of particles between 2.65 and 4.30 mm, and between 2.55 and 4.10 mm, respectively. Due to the physical properties of the material, disc designs and settings that enable working at a specified bout width by providing a small upward particle trajectory angle (e.g., 10°) are preferred to high rotational velocities. However, field application of OMF with spinning discs applicators may be restricted to tramlines spaced at a maximum of 24 m; particularly, when some degree of overlapping is required between two adjacent bouts. The performance of granular fertilizers can be predicted based on properties of the material, such as particle density and size range, using the contour plots developed in this study.
  • Thumbnail Image
    ItemOpen Access
    Soil and crop responses following application of biosolids-derived organomineral fertilisers to ryegrass (Lolium perenne L.) grown in pots
    (American Society of Agricultural and Biological Engineers, 2014-12-31) Antille, Diogenes Luis; Sakrabani, Ruben; Godwin, R.
    Biosolids-derived organomineral fertilisers (OMF) were produced using a novel technique reported in earlier studies. This technique enables addition of N and potash to biosolids granules to form a balanced NPK fertiliser. Two fertiliser products; OMF10 (10:4:4) and OMF15 (15:4:4), were formulated and tested in a glasshouse facility on pot-grown ryegrass in comparison with urea and biosolids granules at N application rates ranging from 0 to 300 kg ha-1. The aim of this research was to contribute to the understanding of nutrients management and dynamics in grass crops fertilised with OMF. The study focused upon dry matter yield (DMY) and crop responses to applied fertiliser, nitrogen use efficiency (NUE) and fertilisers’ effect on soil fertility. Results indicated that ryegrass responds linearly to application of OMF increasing DMY by about 2% to 27% compared with biosolids but to a lesser extent than urea (range: 17% to 55%). NUE was related to the concentration of readily available N in the fertiliser; urea and OMF showed significantly greater (P<0.05) N recoveries than biosolids (26% to 75%, and 19% to 29%, respectively). Total nitrogen in soil and SOM increased (P<0.05) depending on the concentration of organic-N in the fertiliser applied. DMY was lower but more sustained overtime in biosolids-treated pots. OMF application did not result in significant changes in soil extractable-P levels whereas for urea, it decreased significantly while it showed a significant increase in biosolids-treated pots, where soil-P Index changed from 5 to 6. In OMF-treated soil, soil P Index remained close to constant overtime thereby supporting the purpose of the formulations tested.