On the connection of the heat input to the forming quality in wire-and-arc additive manufacturing of stainless steels

Simple item page
dc.contributor.authorLe, Van Thao
dc.contributor.authorBui, Manh Cuong
dc.contributor.authorNguyen, Thuy Duong
dc.contributor.authorNguyen, Van Anh
dc.contributor.authorNguyen, Van Canh
dc.date.accessioned2023-01-06T15:20:25Z
dc.date.available2023-01-06T15:20:25Z
dc.date.issued2023-01-03
dc.description.abstractWAAM (wire-and-arc additive manufacturing) is recently gaining much interest for the fabrication of parts with wide size. A crucial issue associated to this technology is how to control the process variables to achieve expected qualities of parts. The aim of this investigation is to explore the relationship of the heat input (Q) with the forming quality of 308L stainless steel. The outcomes demonstrate that the heat input has significant effects on the shape, microstructures, and mechanical properties of the walls. Both the height and width of single weld beads increase with an increment in Q. The walls fabricated with the low heat inputs feature better mechanical properties and lower surface roughness. The tensile strengths (YS0.2% and UTS) and the surface roughness (Sa) of the walls built with the lower heat input (230 J/mm) are 292 ± 4.95 MPa, 523 ± 4.24 MPa, and 106 μm, respectively, whilst YS0.2% = 273 ± 4.34, UTS = 482 ± 5.66 MPa, and Sa = 179 μm for the wall fabricated with the higher heat input (576 J/mm). This investigation contributes to enriching the understanding on the WAAM process of steels and helping operators to select a proper heat input for specific applications.en_UK
dc.identifier.citationLe VT, Bui MC, Nguyen TD, et al., (2023) On the connection of the heat input to the forming quality in wire-and-arc additive manufacturing of stainless steels. Vacuum, Volume 209, March 2023, Article number 111807en_UK
dc.identifier.issn0042-207X
dc.identifier.urihttps://doi.org/10.1016/j.vacuum.2023.111807
dc.identifier.urihttps://dspace.lib.cranfield.ac.uk/handle/1826/18897
dc.language.isoenen_UK
dc.publisherElsevieren_UK
dc.rightsAttribution-NonCommercial-NoDerivatives 4.0 International*
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0/*
dc.subjectWAAMen_UK
dc.subject308Len_UK
dc.subjectheat inputen_UK
dc.subjectweld beaden_UK
dc.subjectmicrostructuresen_UK
dc.subjectmechanical propertyen_UK
dc.titleOn the connection of the heat input to the forming quality in wire-and-arc additive manufacturing of stainless steelsen_UK
dc.typeArticleen_UK

Files

License bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
1.63 KB
Format:
Item-specific license agreed upon to submission
Description:
Download

Collections

Staff publications (SATM)